Yamaha 2017 Yamaha F200 3.3L Offshore XCA Outboard Motor

Carrying the XCA trim code, this 2017 Yamaha outboard pairs a 60-degree, DOHC, 24-valve V6 with a 25-inch shaft, rated 200 hp and weighing in at 608 lbs dry. It's built for offshore boats that need steady midrange pull rather than a light, portable setup. Under the cowling Displacement is 3352cc, fed by six independent injectors under precision multi-point injection with variable camshaft timing layered in. The alternator is rated 44 amps, with roughly 27 amps earmarked for keeping the battery topped off, and starting is electric with power trim and tilt. Sacrificial anodes and forged pistons target saltwater duty, and a direct-drive system limits play between the crankshaft and lower unit. Buyer notes This size of V6 typically ships as a bare powerhead rather than a complete rig, so budget separately for a control box, cables, and a propeller sized to your boat unless your quote already lists them. Offshore buyers running this class of engine also tend to add a dedicated water-separating fuel filter upstream of the factory unit for long runs in rough conditions, and a fresh set of anodes at commissioning is cheap insurance against early corrosion in salt water. Ask us about matching gear ratios to your preferred prop pitch before you finalize an order. Coverage runs three years for both pleasure and government use, narrowing to a single year once the motor goes into commercial service. Confirm rigging and propeller compatibility with us before ordering.