Miller Trailblazer 325 Arcreach Engine Driven Welder/Generator W/Gfci (907797001)

Kohler-powered and rated for heavy-industrial duty, this Trailblazer 325 build adds a ground-fault-protected outlet to the line's standard ArcReach configuration, giving a crew remote control and a safer auxiliary outlet together. Controlling it from the feeder Settings can be dialed in right at the wire feeder, or through a separate Stick and TIG remote pendant, so a career welder is not making a trip back to the power source every time something needs adjusting. The engine's own speed control steps down automatically once a job needs less output, then climbs back up as demand returns, which keeps noise and fuel use lower than running flat out the whole shift. Arc and generator quality Generator output stays clean thanks to a specially shaped rotor paired with filtering circuitry, clean enough that jobsite power tools should not interfere with the weld. Arc selection runs to three settings for stick work, a pair of options for wire feed, and three separate TIG modes, one of them tuned for thin or stainless material. This unit is rated at 325A, holding a full duty cycle at that output on mild steel or stainless steel. Hauling it around Scale weight comes to 460 pounds, so this lives on a flatbed or a trailer hitch rather than getting lifted by hand, and Miller stands behind the unit for 3 years. What does the extra outlet add here? It is a ground-fault-protected circuit, meant to make corded tools run off the generator safer to use. Specifications Brand Miller SKU IMIL00000389 MPN MIL907797001 Mfgs MPN 907797001 UPC 715959678407 Prop65 Yes Material Mild Steel, Stainless Steel Process Flux-Cored, MIG, Stick, TIG Max Amperage Output 325 Usage Heavy Industrial Phase Single Phase Manufacturer’s Warranty 3 Years Polarity DC Duty Cycle 100% Duty Cycle 100% at 325A Portability 460 lbs Skill Level Career Welder Discontinued Product No