Lincoln Electric Flextec 350XP Multi Process Welder

The Lincoln Flextec 350XP is a new multi-process welder covering stick, flux-cored, MIG, TIG, and gouging from one three-phase power source, rated up to 425 amps output. Fully encapsulated, environmentally protected electronics are rated to handle job-site heat as high as 131 degrees Fahrenheit. What it is for This power source is compatible with several feeder types, analog, digital, CrossLinc, or across-the-arc, and lets the operator set welding procedures right at the feeder rather than running separate control cables back to the machine. A voltage reduction device lowers open-circuit voltage for added operator safety between welds. What to check before buying Power input: runs on 380 to 600 volt three-phase power; this unit's rated input voltages are 380, 400, 460, and 575. Duty cycle: rated 100 percent at 300 amps and 60 percent at 350 amps. Weight: at 82 pounds, it is portable enough to move between work areas without a cart. Can it gouge? Yes, gouging with 3/16-inch carbon electrodes is within its range. What is included? The power source with Tweco connections and an 8.5-foot power cord with no plug attached. What is the warranty? Lincoln backs this machine with a 3-year manufacturer's warranty. Output ranges from 5 to 425 amps, wide enough to cover light sheet work and heavier structural welding on the same machine without swapping power sources. welding equipment Specifications More Information Brand Lincoln SKU ILIN20160044 MPN LINK4272-2 Mfgs MPN K4272-2 Prop65 Yes Material Mild Steel, Stainless Steel Process Flux-Cored, MIG, Stick, TIG Max Amperage Output 425 Usage Heavy Industrial, Industrial Phase Three Phase Manufacturer’s Warranty 3 Years Polarity DC Duty Cycle 60% Duty Cycle 60% at 350A, 100% at 300A Portability 82 Skill Level Career Welder Input Voltage 380, 400, 460, 575 Discontinued Product No