Kubota Mini Compact Excavator Kubota D902 Engine, 89″ Max. Digging Depth, 1.7 Ton, 4145 LBS Operating Weight, MEC17

This 1.7-ton mini excavator is powered by Kubota's 3-cylinder D902 diesel, rated at 15.8 net horsepower, and reaches an 89-inch maximum digging depth with an operating weight of 4145 pounds. Reach and digging force A 72-inch boom and a 37.4-inch arm are what give this machine its 89-inch maximum digging depth, more vertical reach than a smaller compact excavator typically offers, which suits trenching and foundation work where depth matters as much as bucket size. A 17.7-inch, 1.4-cubic-foot bucket is sized to the digging force this engine and hydraulic system can deliver. Undercarriage and swing Six track rollers under rubber tracks spread weight for stability while digging, and the house itself rotates at 9.5 rpm through a Danfoss swing motor. Travel speed tops out at 2.67 mph in high range and 1.37 mph in low range, so expect to trailer it between sites rather than drive it there. What size bucket does it carry? A 17.7-inch bucket rated at 1.4 cubic feet. How deep can it dig? Up to 89 inches at maximum digging depth, with a 72-inch boom and 37.4-inch arm behind that reach. New condition. The D902 engine's warranty runs 2 years or 2,000 hours of use, whichever comes first, with the machine itself covered for 1 year. California's Proposition 65 law requires a warning that exhaust from diesel equipment such as this one is associated with cancer and reproductive harm. Specifications ENGINE Model Kubota D902 Rated speed 2300rpm No.of Cylinders 3 Displacement 54.8in Stroke 2.9in Engine Output, Net 15.8hp Bore 2.83in Warranty For Engine 2-Year or 2,000-Hour Warranty, Whichever Comes First. TRAVEL SYSTEM Track Roller Qty 6 Maximum Traction Force, Low Speed 4047lbf Type of tracks Rubber Ground Clearance 5.7in Travel Speed, High 2.67 mile/h Ground Pressure 4.2psi Travel Speed, Low 1.37 mile/h Gradeability, Maximum Maximum 30 degrees WEIGHT Operating Weight 4145lb HYDRAULIC SYSTEM Pump Flow at 2,300 rpm 17gpm Auxiliary Circuit, Primary, Flow 9.1gpm SWING SYSTEM Swing Motor Danfoss Swing Speed 9.5rpm Swing Motor Type SW2.5K Tail Swing Radius 25.6in DIGGING FORCE Boom Length 72in Bucket Digging Force 3597lbf Arm length 37.4in Arm Digging Force 2136lbf REFILING CAPACITIES & LUBRICATIONS Fuel Tank 5gal Hydraulic Oil Tank 3.6gal Engine Oil 1gal System Capacity 5.7gal BUCKET Bucket Capacity 1.4ft³ Bucket Width 17.7in SCOPE OF WORK Max.Digging Height 141in Min Turning Radius Of Working Device 57in Max.Dumping Height 98in Max. Lift Above Ground 11in Max.Digging Depth 89in Max. Drop Below Ground 7.5in Max.Vertical Digging Depth 75in Boom Swing, Left 65° Max Digging Radius 154in Boom Swing, Right 50° Max.digging Radius At Ground Level 151in DIMENSIONS Overall Length 133in Blade Height 11.8in Ground Contact Length （Transportation） 96in Crawler Wheel Base 48.4in Overall Width （Retracted/Expanded) 39/51in Shoe Width 9.1in Overall Height（To Top Of Cab） 94.7in Track Length 62.7in Counter Weight Ground Clearance 18in Track Gauge（Retracted/Expanded) 30/42in Ground Clearance 5.7in Track Width（Retracted/Expanded) 39/51in Blade Width（Retracted/Expanded) 39/51in SERVICE Package Method Wood Case Warranty For Machine 1 Year Packing Size 112.6×43.7×99.2 in Weight (N.W./G.W.) 3968/4508lb