Kubota 400 Pro Kubota Welder/Generator

This 400-amp DC welder/generator runs on a Kubota diesel rather than the Mitsubishi engine used elsewhere in this family, and at 950 pounds it is also the lightest of the 400-amp Big Blue machines in this batch. It is rated for heavy industrial, single-phase use with a 100 percent duty cycle across its full output. What it is set up to do Output covers DC stick and DC TIG from 20 to 400 amps, with FCAW and MIG running 14 to 40 volts, so the same machine handles structural stick work and thinner-material MIG or flux-cored passes without a second power source. Generator capacity peaks at 12,000W, with 10,000W continuous, enough to run auxiliary tools alongside the arc. Before you order Idle sound is rated at 66 dB, rising to 71.6 dB under weld load Overall dimensions are 32 by 26.25 by 56 inches It is rated for Career Welder-level use and ships with a 3-year manufacturer's warranty This is a new unit; confirm your feeder setup matches the standard 14-pin receptacle before ordering Panel controls run through the standard set for this engine family: metering, hot start, idle control, block heater, and a corrosion-resistant finish. How heavy is this unit to move? 950 pounds, the lightest of the Kubota- and Mitsubishi-powered 400-amp machines in this range. Does it need three-phase power? No, it is a single-phase machine per the listed specification. Specifications Brand Miller SKU IMIL20180018 MPN MIL907732 Mfgs MPN 907732 UPC 715959649476 Prop65 Yes Material Mild Steel, Stainless Steel Process Air Carbon Arc Cutting and Gouging, Flux Cored (FCAW), MIG, Stick, TIG Max Amperage Output 400 Amps Usage Heavy Industrial, Industrial Phase Single Phase Manufacturer’s Warranty 3 Years Polarity DC Duty Cycle 100% Duty Cycle 100% @ 400A 24VDC Portability 950 lbs Skill Level Career Welder Discontinued Product No