Kubota 325 Kubota Diesel Welder/Generator

This engine-driven welder/generator is built around a 25 HP Kubota diesel and a Miller-built power section rated for 325 amps, with 12,000W of peak generator output and 10,500W continuous. It covers stick, MIG, flux-cored, DC TIG, and air carbon arc cutting and gouging from a single trailer-mounted unit, which suits shops that need both an arc and site power in one trip. How the controls behave A built-in speed control tracks the weld load and steps the engine through four preset speeds instead of running flat-out the whole shift, which helps on long days where the load changes often. Two items are factory options rather than standard equipment: a 2,400-watt, 120-volt inverter output for sensitive gear at idle, and feeder-side remote control of the power source without running a control cord back to the machine. Numbers worth checking before you order DC stick output spans 30 to 325 amps, MIG runs 10 to 35 volts, and DC TIG covers 10 to 325 amps Sound measures 75 dB at a 150-amp load, climbing to 81.5 dB at the full 325-amp load The Kubota D902 diesel is rated 24.8 horsepower at 3,600 RPM, fed from a 12-gallon tank Footprint is 28 by 20 by 45.4 inches, and shipping weight is 620 pounds This unit ships new and carries a 2-year manufacturer's warranty. Does the generator run while I weld? Yes, the 10,500W continuous rating is independent of the welding arc. Will it fit a standard utility trailer? Check the 28 by 20 by 45.4 inch footprint and 620-pound weight against your trailer and tie-down points first. Specifications Brand Miller SKU IMIL20180022 MPN MIL907799 Mfgs MPN 907799 UPC 715959678452 Prop65 Yes Material Mild Steel, Stainless Steel Process Air Carbon Arc Cutting and Gouging, Flux Cored (FCAW), MIG, Stick, TIG Max Amperage Output 325 Amps Usage Heavy Industrial, Industrial Phase Single Phase Manufacturer’s Warranty 2 Years Polarity DC Duty Cycle 100% Duty Cycle 100% @ 325A Portability 620 lbs Discontinued Product No