Kubota 300 Kubota Cc/Cv Welder Generator

The Lincoln Cross Country 300, in its Kubota CC/CV configuration, is a pipe-welding engine drive offering simple selection among constant-current, constant-voltage, and TIG control modes for pipeline-grade arc quality. What it's for Power comes from a Kubota diesel engine with four water-cooled cylinders running at 1800 RPM and meeting EPA Tier 4 requirements. This unit is tuned for root, fill, and cap passes with a stick arc developed alongside professional pipeline welders, using dual continuous controls to keep the control layout simple. DC welding output ranges from 40 to 300 amps, with a rated DC pipe output of 300 amps at 32 volts and 100 percent duty cycle, and a CV output of 300 amps at 32 volts or 350 amps at 28 volts, both at 100 percent duty cycle. What to check before buying Generator output on the three-phase side is rated at 12,500 watts peak and 11,000 watts continuous, while single-phase output is 11,500 watts peak and 10,000 watts continuous, through 120/240V single-phase or 240V three-phase power, so match that to the tools you plan to run. At 1,034 pounds and roughly 31.9 by 25.3 by 56 inches, confirm it fits your intended truck bed or trailer space. What comes with it A 125-foot wire remote is part of the package, carrying two 115V receptacles for powering grinders or lights away from the unit, alongside sliding engine access doors on each side, a centralized dashboard gauge, and an 11.6-gallon fuel tank rated for roughly 38 hours of runtime at low or no idle. The unit is backed by a 3-year warranty. Specifications Brand Lincoln SKU ILIN20190018 MPN LINK4166-7 Mfgs MPN K4166-7 UPC 15082630335 Prop65 Yes Process Flux Cored (FCAW), MIG, Stick, TIG Max Amperage Output 300 Amps Phase Both Manufacturer’s Warranty 3 Years Polarity DC Duty Cycle 100% Duty Cycle 100% @ 300A Portability 1034 lbs Skill Level Career Welder Discontinued Product No