Ford Performance Parts Gen 3 5.0L Coyote Power Modules M-9000-PMCM3

The Ford Performance Gen 3 5.0L Coyote Power Module (M-9000-PMCM3) pairs an assembled 460-horsepower 5.0L Coyote engine with a Tremec six-speed manual transmission in one kit, covering 2018-2022 Ford applications and aimed at builders who want a complete modern V8-and-manual-transmission swap rather than sourcing engine and gearbox separately. What's in the kit Assembled 5.0L Coyote long block rated at 460 hp at 7,000 rpm and 420 lb-ft of torque at 4,600 rpm, with a 12.0:1 compression ratio and aluminum block Tremec Magnum six-speed manual transmission with a 2.66 first gear, plus clutch fork, throw-out bearing, clutch kit, and a billet flywheel to install before the engine goes into the car Intake manifold, cast aluminum cylinder heads, throttle body, flywheel, spark plugs and spark plug wires, timing cover, valve covers, and oil pan, with the water pump and harmonic balancer also fitted Tunable control pack PCM and installation kit plus the wiring harness, a starter paired with its index plate, the Boss 302 alternator kit, a roller pilot bearing, and a steel Quicktime bellhousing Installation notes The engine ships with a dual-mass flywheel installed; swap in the included billet flywheel before the engine goes into the vehicle. This kit does not include a driver-side header, so plan to source one that matches your chassis separately. It is tuned to run on pump gas, and because this is a manual-transmission package, there is no transmission controller or torque converter included.