Chevrolet 50 Inch Chevy Universal Straight Axle Kit, Semi-Elliptical/Gasser

This 50 inch straight axle kit builds a semi-elliptical, gasser front end around 1949-54 Chevy-style passenger car spindles, using a plain-steel tube axle with welded ends. On flat plate steering arms, the matching tie rod for this width is 47.5 inches eye-to-eye. What is in the box Included are the welded, 0.250 inch wall tube axle, U-bolts with a pair of axle pads, spring shackles sized 1-3/4 inch on nylon bushings, brackets to mount it to the frame, a pair of 32 inch six-leaf springs, and hardware for assembly. Before you order The spring pads adjust along the axle and get welded into position once set for your frame width; other widths, plus a custom-length option, are offered if 50 inches is not right for your project. This kit excludes spindles and is not intended for off-road race use. Does the tie rod length change with axle width? Yes, this 50 inch width uses a 47.5 inch eye-to-eye tie rod. Are the leaf springs included? Yes, a pair of 32 inch six-leaf springs. Specifications KEY SPECS MFG. Part # 91639036-50 Brand Motors Front Suspension Type Straight Axle Suspension Height Adjustment Stock Height Control Arm Style Not Included Shock Type Not Included Spring Type Leaf Spring Finish Natural Bolt Pattern Not Applicable Rotor Diameter Not Included Spindle Style Chevy/GM Stock Dropped Spindles No Dropped Axle No Dropped Control Arms No Front Leaf Spring Style Semi-Elliptical Gasser Spindles Included No Steering Included No Welding Required Yes